|
|
|
GlucoSmart ® Swing Blood Glucose Measurement System
|
 |
|
Model |
AGM-4000 |
| Method |
Electrochemical with
GlucoSmart ® Swing blood glucose test strips |
|
Pharma Zentral Number |
Starterset: PZN0112006 / Single Meter:
PZN0112259 |
|
Test strips |
GlucoSmart ® Swing blood glucose test
strips
(PZN0112265) |
|
Measurement range |
10 - 900 mg/dl, bzw. 0,55 - 50 mmol/l |
|
Units (changeable) |
[mg/dl], [mmol/l]
when changing the unit, also the results in the memory will be recalculated |
|
Measurement time |
5 seconds |
|
Calibration |
Autocoding (Code is any more necessary. The codes are read by the meter from the test strip) |
|
Energy |
Lithium battery (CR2032), DC 3 V |
|
Battery life time |
~1000 cycles (1 year when testing 3 times a
day)
CR 2032 is the most spread battery type in small electronic devices. It can
be bought in pharmacies, photo shops worldwide. |
|
Size of the meter |
49 mm width; 93,5 mm length; 7,5 mm height |
|
Weight |
61 g (with battery) |
|
Type/ Size of display |
LCD / 37 mm x 42 mm |
| Data ttorage |
500 results with date, time and
Measurement results (before meal,
after meal, no influences on measurement result, control measurement) |
|
Additional functions |
- Up to 4 daily signals free adjustable
- up to 5 users can be identified by the meter (see user symbol). This enables either to use one device for several users,or to "mark" the individual device if the same several GlucoSmart ® Swing are used within a group.
|
|
Calibration method |
whole blood (YSI
2300 Stat Plus)
Measurement result can be optionally displayed as plasma-equivalent |
|
PC Interface |
RS-232C |
|
Energy safe function |
3 minutes after the last user interaction |
The unit was developed to be used within the following
environmental conditions
|
|
|
Operating Temperature Range |
+ 10 to + 40 °C |
|
Relative humidity |
< 85% |
|
Altitude |
up to 2500 m above NN |
|
Allowed Hematocrit |
20-60% |
|
Conducted noise |
installation category I
(overvoltage category I) IEC664 |
|
Pollution category |
2 to IEC664 |
|
|
|
|
|
|
GlucoSmart ® Swing blood glucose test strips
|
|
|
To use with |
Exclusively with GlucoSmart ® Swing Blood Glucose Meter
model AGM4000 |
|
Electrode material |
Gold |
|
Blood insertion method |
capillary insertion |
|
Method |
electrochemical |
| Special functionalities |
- Control electrode verification mechanism for sufficient blood probe
- Side insert enables optimum guidance of the strip along the skin to the blood probe
- Transparent control window enables to identify air bubbles in inserted blood probe caused if capillary lost contact to blood probe while blood insertion (e.g. by trembling)
|
|
Necessary blood probe |
0,5 µl |
|
Size |
33 mm x 7,5 mm |
|
Shelf life time |
Usable within 4 months after the first opening of the original vial. |
|
Storage |
In the original vial between 1 to 30°C. |
|
Packaging unit |
50 test strips in 2 vials of 25 strips with drying agent |
|
|
|